![](https://www.intramark.hu/wp-content/uploads/2024/03/intramark_o-gyuru.png)
X-gyűrű
![](https://www.intramark.hu/wp-content/uploads/2024/07/xgyuru-1.png)
![](https://www.intramark.hu/wp-content/uploads/2024/07/xgyuru-2.png)
Double acting X-ring with special design lip to be used both for rod and piston applications. X-ring is assembled into the groove by hand. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the wiper must be oiled with system oil.
• Can be used both for reciprocating and rotating hydraulic applications
• Low friction compared to o-rings
• No tool parting line on the dynamic surface
• No twisting in the groove
• Both for rod and piston application
• Economical sealing solution at low pressures
Hydraulic and pneumatic valves, light duty cylinders, flanges and heavy duty applications.
Material | Code |
NBR | NB7001 |
OPERATING CONTITIONS
Temperature | -30 °C +105 °C |
Pressure | ≤400 bar |
Speed | ≤0.5 m/sec |
![](https://www.intramark.hu/wp-content/uploads/2023/10/kep.png)
Szeretne többet megtudni a termékről?
![](https://www.intramark.hu/wp-content/uploads/2022/09/mail-2.png)
E-mail
info@intramark.hu
![](https://www.intramark.hu/wp-content/uploads/2022/09/phone-1.png)
Telefon
+36 52 540 555
+36 20 913 4498
![](https://www.intramark.hu/wp-content/uploads/2023/10/nyitvatartas-3.png)
Nyitvatartás
H-CS: 8:00 – 16:30
P: 8:00 – 16:00
![](https://www.intramark.hu/wp-content/uploads/2022/09/localization-2.png)
Intramark Kft. központ
4031 Debrecen,
Köntösgát sor 10.