K 55 is a single acting complete piston seal which consists of an aluminum plate vulcanized with elastomeric nitrile rubber using special production methods.

PRODUCT ADVANTAGES

  • Ready to fit complete piston

  • Reliable pressure application at the end of stroke by the venting passages.

  • Low friction and smooth running due to sealing lip geometry

  • Easily fastened to the piston rod without using additional sealing elements

  • Economical sealing solution

APPLICATION

Standard pneumatic cylinders and after market.

INSTALLATION

K 55 is pushed onto the piston rod on the clamping flange towards the rod and fixed by fastening. The nut has to be secured. The sliding surface and the cylinder bore should be oiled with oil that must not go into the reaction with the sealing element during the installation process.

NOTES

For special applications that require high temperatures, K55 can be produced in FKM material.

MaterialCode
NBR 70 SHORE ANBR7001
ALUMINIUMAL9901
Surface roughnessRmax
Sliding Surface Ød≤4 μm

OPERATING CONTITIONS

MediaPrepared, dried and de-oiled compressed air
Temperature-30 °C
+105 °C
Pressure≤12 bar
Speed≤1.0 m/sec

Szeretne többet megtudni a termékről?

KAPCSOLAT